Cisco Cisco RF Gateway 1
Clock Configuration
78-4025112-01 Rev H0
49
Clock Configuration
The RF Gateway 1 provides several different configuration options for obtaining and
maintaining accurate time on the system. These options include time
synchronization from a network time server and obtaining time from an on-board
real-time clock (RTC).
maintaining accurate time on the system. These options include time
synchronization from a network time server and obtaining time from an on-board
real-time clock (RTC).
Real -Time Clock Setup
The RF Gateway 1 has an on-board, real-time clock (RTC) with battery back-up
which can be used to provide system time. The RTC can be set manually via the web
interface or configured to be updated with network time obtained from an SNTP
server. The Synchronize With Server parameter is used to control the RTC
synchronization behavior. When set to Disabled, the RF Gateway 1 obtains system
time from the RTC at startup. Once set, the internal system clock runs
independently until the RTC is changed. The Clock Configuration page provides the
following user-configurable options.
which can be used to provide system time. The RTC can be set manually via the web
interface or configured to be updated with network time obtained from an SNTP
server. The Synchronize With Server parameter is used to control the RTC
synchronization behavior. When set to Disabled, the RF Gateway 1 obtains system
time from the RTC at startup. Once set, the internal system clock runs
independently until the RTC is changed. The Clock Configuration page provides the
following user-configurable options.
Current Time
New Time
Synchronize with Server
To Set the Real Time Clock:
1 Navigate to the System/Clock page.
1 Navigate to the System/Clock page.
Result: The Clock Configuration page is displayed.
2 In the New Time field, enter year, date and current time.
Example: 2008/06/17/0052:26
3 Click Apply.