Cisco Cisco StadiumVision Director Manuel De Maintenance
© 2011 Cisco Systems, Inc. All rights reserved.
Page 22 of 40
6. Click the Refresh button.
7. Select DMP Install > Firmware Upgrade.
8. From the Device List, select the DMPs on which you want to upgrade the
firmware. If you want to update the firmware on all DMPs, skip this step.
9. In the Command Parameters area, click the 4305 Parameters tab or the 4310
Parameters tab. The list of firmware images will display.
10. Select the firmware image you want downloaded to the DMP. If there are both
DMP 4305Gs and DMP 4310Gs in your network, select both types of DMPs for
this command.
this command.
11. Click the Play button to upgrade the firmware on the selected DMPs. See
Figure 13. Upgrading the Firmware Image (DMP 4310G)
12. Select the Console tab in the Device Details panel to view the firmware upgrade
progress. Refer to Figure 14. The DMP will reboot about 20 minutes after you
apply the Firmware Upgrade command.
apply the Firmware Upgrade command.