Cisco Cisco StadiumVision Mobile Streamer Manuel De Maintenance
© 2011 Cisco Systems, Inc. All rights reserved.
Page 58 of 94
the Dashboard Console Window for the selected DMP. A summary of the Workflow
execution is also displayed in the Checked At column in the Device List.
execution is also displayed in the Checked At column in the Device List.
To view the workflow status:
1. Open the Dashboard. The Auto Registered folder should be highlighted in red
indicating that there are DMPs that have been auto registered but have not been
provisioned. When a number appears next to Auto Registration in the Device
List, it indicates that there are DMPs that are registered but do not have any
zones or groups assigned.
provisioned. When a number appears next to Auto Registration in the Device
List, it indicates that there are DMPs that are registered but do not have any
zones or groups assigned.
2. Click the Auto Registered folder and select the DMP of interest.
3. Click on the DMP of interest and then click the Console tab below the Device
List to view a message log indicating the DMP‟s transition through the five auto
provisioning steps.
provisioning steps.
In the example shown in Figure 46, the log messages show that auto-provisioning
step 3: Stage Template is being executed. The progress is indicated as (3 of 5) in
the „Checked At‟ box in the Device List.
step 3: Stage Template is being executed. The progress is indicated as (3 of 5) in
the „Checked At‟ box in the Device List.
The status messages also indicate that step 2: Upgrade Firmware was skipped
since the DMP already has the correct firmware image.
since the DMP already has the correct firmware image.
Figure 46.
Viewing the DMP Auto Provisioning Progress
As the auto provisioning completes, three icons in the Device List indicate the
status. Refer to Figure 47 and Table 4.
status. Refer to Figure 47 and Table 4.