Cisco Cisco Prime Network Services Controller 3.0
© 2013, 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 125 of 169
nsc(policy-mgr) /org/policy/corefile # set path /test
nsc(policy-mgr) /org/policy/corefile* # commit-buffer
nsc(policy-mgr) /org/policy/corefile #
Setting the Port
You can set the core file policy port number.
BEFORE YOU BEGIN
Services Controller CLI.
CLI
Policy Manager
SUMMARY STEPS
1. connect policy-mgr
2. scope org
3. scope policy
4. scope corefile <policy-name>
5. set port <port-number>
6. commit-buffer
DETAILED STEPS
Command
Purpose
Step 1 connect policy-mgr
Example:
nsc# connect policy-mgr
Places you in the policy manager
CLI.
CLI.
Step 2 scope org
Example:
nsc(policy-mgr)# scope org
Places you in organization mode.
Step 3 scope policy
Example:
nsc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4 scope corefile
Example:
nsc(policy-mgr) /org/policy # scope corefile
EaCorePA10
Places you in core file mode.
Step 5 set port
Example:
nsc(policy-mgr) /org/policy/corefile # set port
10
Sets the port number.
The range of valid values is 1 to
65535.
65535.
Step 6 commit-buffer
Example:
nsc /system/backup* # commit-buffer
Commits (saves) the
configuration.
configuration.