Cisco Cisco Prime Network Services Controller 3.0
© 2013, 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 127 of 169
4. scope faultpolicy <policy-name>
5. set adminstate {disabled | enabled}
6. commit-buffer
DETAILED STEPS
Command
Purpose
Step 1 connect policy-mgr
Example:
nsc# connect policy-mgr
Places you in the policy manager
CLI.
CLI.
Step 2 scope org
Example:
nsc(policy-mgr)# scope org
Places you in organization mode.
Step 3 scope policy
Example:
nsc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4 scope faultpolicy
Example:
nsc(policy-mgr) /org/policy # scope faultpolicy
EaFaultPA12
Places you in faultpolicy mode.
Step 5 set adminstate
Example:
nsc(policy-mgr) /org/policy/faultpolicy # set
adminstate enabled
Sets the administration state..
Step 6 commit-buffer
Example:
nsc /system/backup* # commit-buffer
Commits (saves) the
configuration.
configuration.
EXAMPLES
This example shows how to set the administration state:
nsc# connect policy-mgr
Cisco Prime Network Services Controller
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
nsc(policy-mgr)# scope org
nsc(policy-mgr) /org # scope policy
nsc(policy-mgr) /org/policy # scope faultpolicy EaFaultPA12
nsc(policy-mgr) /org/policy/faultpolicy # set adminstate enabled