Cisco Cisco Prime Network Services Controller 3.0
© 2013, 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 128 of 169
nsc(policy-mgr) /org/policy/faultpolicy* # commit-buffer
nsc(policy-mgr) /org/policy/faultpolicy #
Setting Clear Action
You can set clear action.
BEFORE YOU BEGIN
Services Controller CLI.
CLI
Policy Manager
SUMMARY STEPS
1. connect policy-mgr
2. scope org
3. scope policy
4. scope faultpolicy <policy-name>
5. set clearaction {delete | retain}
6. commit-buffer
DETAILED STEPS
Command
Purpose
Step 1 connect policy-mgr
Example:
nsc# connect policy-mgr
Places you in the policy manager
CLI.
CLI.
Step 2 scope org
Example:
nsc(policy-mgr)# scope org
Places you in organization mode.
Step 3 scope policy
Example:
nsc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4 scope faultpolicy
Example:
nsc(policy-mgr) /org/policy # scope faultpolicy
EaFaultPA12
Places you in faultpolicy mode.
Step 5 set clearaction
Example:
nsc(policy-mgr) /org/policy/faultpolicy # set
clearaction retain
Sets clear action.
Step 6 commit-buffer
Example:
nsc /system/backup* # commit-buffer
Commits (saves) the
configuration.
configuration.