Cisco Cisco Prime Collaboration Assurance 11.5 Livre blanc

Page 23 of 38

Step 3. Go to the Cisco Syslog Agent section and update the following required fields:

●

Remote Syslog Server Name with the IP address of Prime Collaboration server

●

Select Informational from the drop-down menu for Syslog Severity For Remote Syslog Messages

Step 4. Select Cisco Unified Serviceability from the Navigation drop-down menu in the top-right corner of the

device's home screen.

Step 5. Select Alarm > Alarm Configuration.

Step 6. Select the correct alarm configuration elements (Server, Service Group, and Service) for your particular

machine and then click Go. Enter the Cisco Prime Collaboration server IP address or DNS name in the
server textbox. Select the service group and service options based on the information in Figure 19.

Figure 19. Service Group and Service Options

Step 7. Select the Enable Alarm check box and select the proper Alarm Event Level.

See the Alarm Configuration Settings in Cisco Unified Serviceability Administration Guide for Cisco Unified

Communications Manager on Cisco.com.

For example, for Local Syslogs, set the alarm event level to Error.

Step 8. Enter any necessary information based on your Unified Communications Manager. For device cluster

discovery or remote syslog notification, set the alarm event level to Informational.

Step 9. Check Apply to all nodes.

Figure 20. Cisco Unified Communications Manager Serviceability Page