Brother MFC-5860CN Mode D'Emploi

Control panel setup

This field displays the current gateway or router address used by the machine. If you are not using DHCP or 
BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a 
gateway or router, leave this field blank. Check with your network administrator if you are unsure.

a

Press Menu, 5, 1, 4.

b

Select 1 to change. Enter the Gateway address.

c

Press OK.

d

Press Stop/Exit.

a

Press Menu.

b

Press a or b to select LAN.

Press OK.

c

Press a or b to select TCP/IP.

Press OK.

d

Press a or b to select Gateway.

Press OK.

e

Press a or b to select Change.

Press OK.

f

Enter the Gateway address.
Press OK.

For DCP models, press a or b repeatedly to enter the first three-digit number for the Gateway address. 
Press c to enter the second three-digit number. Repeat this step until you have entered the fourth three-
digit number to complete the Gateway address. Press OK.

 

g

Press Stop/Exit.