Brother MFC-5860CN Mode D'Emploi
Control panel setup
18
3
Node Name
3
You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will
be the name that is registered by the WINS server on your network. Brother recommends the name
BRN_xxxxxx (where xxxxxx is the last six digits of the Ethernet address) (up to 15 characters).
be the name that is registered by the WINS server on your network. Brother recommends the name
BRN_xxxxxx (where xxxxxx is the last six digits of the Ethernet address) (up to 15 characters).
(For Monochrome Display models)
3
a
Press Menu, 5, 1, 5.
b
Select 1 to change. Enter the Node Name.
c
Press OK.
d
Press Stop/Exit.
(For Color Display models)
3
a
Press Menu.
b
Press a or b to select LAN.
Press OK.
c
Pressa orb to select TCP/IP.
Press OK.
d
Press a or b to select Node Name.
Press OK.
e
Press a or b to select Change.
Press OK.
f
Enter the Node Name.
Press OK.
Press OK.
Note
DCP models cannot change the Node Name from the control panel menu.
g
Press Stop/Exit.