Samsung WQHD Business Monitor S32D850T (32") Manuel D’Utilisation

Screen Adjustment

4

4 Screen Adjustment

4.3

PIP/PBP

The PIP (Picture in Picture) function separates the screen into two parts. One source device is displayed 

on the main screen at the same time the another source device is displayed in inset windows. 

The PBP (Picture by Picture) function separates the screen in half displaying output from two different 

source devices simultaneously on the left and right sides of the screen.

 



Compatible with Windows7 and Windows8.



The 

PIP/PBP

 function may not be available depending on the specifications of the graphics card 

used. If the screen is blank in 

PIP/PBP

 mode when the optimum resolution is selected, go to 

Control Panel 

 Display 

 Screen Resolution and click Detect on the PC. 

(Instructions are based on Windows 7.) If the screen is blank when the resolution is set to the 

optimum resolution, change the resolution to 1280 x 1024.



The screen may flicker briefly or appear after a delay when you enable or disable the 

PIP/PBP

 

function or when you change the screen size with the 

PIP/PBP

 function activated.

This can typically arise when a PC and a monitor are connected to two or more input sources. It 

has nothing to do with the performance of a monitor.

The issue is mainly caused when the video signals are delayed in transmission to the monitor 

depending on the graphics card performance.



To maximize the picture quality, it is recommended to use a graphics card that supports 

2K (2560 x 1440) resolution.



When the 

PIP/PBP

 function is enabled, the resolution may not automatically switch to the 

optimum resolution due to a compatibility issue between the graphics card and the Windows 

operating system. Set 

PIP/PBP Mode

 to 

Off

 or manually change the resolution to the optimum 

resolution using the Windows interface.

 

→ 

→