Samsung RFG28MESL Manuel D’Utilisation

 

operating

•  If you are in trouble of inserting the water

filter as high pressure of water, shut off the
water supply valve.

•  The locked symbol should be lined up with the

indicator line.

5.  press the “Alarm/hold 3 sec for Filter Reset”

button (

(Filter Reset)

) for about

3 seconds to reset the water
filter. The color of indicator (

) changes from red to light

off.

6.  If you turned off the water

supply, turn it back on.

For a replacement water filter, you can visit
your local home Improvement center or
contact the Samsung Parts distributor.
Be sure the replacement water filter has the
SAMSUNG logo on the box and on the water
filter.

The Filter light turns red to let you know
when it is time to change your water
filter cartridge.
To give you time to get a new filter,
the red light comes on just before the
capacity of the current filter runs out.
Changing the filter on time provides
you with the freshest, cleanest water from your
refrigerator.

1.  Shut off the water supply. Then, turn the water

filter (

1 ) about 1/4 turn, counter-clockwise.

2.  Pull the water filter ( 1 ) from the case filter ( 2 ).

•  To change the water filter more easily, shut

off the water supply valve.

•  Sometimes, it is hard to disassemble the water

filter because impurities in the water cause it to
stick. If you are having difficulties, grip the water
filter firmly and pull it hard.

•  When you pull the water filter, a little water can

leak from the opening. This is normal. To minimize
the water leaks, keep the filter cartridge horizontal
when you pull it.

•  To prevent overflow, empty the water tray filter ( 3 )

and dry around of case filter ( 

2 ).

3.  Insert the new filter into the filter case ( 4 )

4.  Push the filter, and then turn it clockwise until it

locks.

(Red)

2

1

3

2

4

DA99-03404E-12.indb   20

2016. 12. 2.   �� 4:33