Samsung 蓝光播放器 BD-H5900 Manuel D’Utilisation
Use the number keypad on your
remote control to enter the numbers
for the value. Use the ◄► buttons
on the remote control to move from
entry field to entry field within a value.
When done with one value, press the
v
button.
6.
Press the ▲ or ▼ button to move
to another value, and then enter the
numbers for that value following the
instructions in Step 5.
7.
Repeat Steps 5 and 6 until you have
filled in all values.
✎
NOTES
`
You can get the Network values from
your Internet provider.
8.
When finished entering all the
values, and then press the 返回 or
退出
buttons. The player verifies
the network connection and then
connects to the network.
Wireless Network
You can setup a wireless network
You can setup a wireless network
connection in four ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
- WPS(PIN)
When you configure the wireless
network connection, any wireless
network devices currently
connected through the player
or, if applicable, the player's
current wired connection, will be
disconnected.
Ğ
Wireless - Automatic
1.
In the Home screen, select Settings,
and then press the v button.
2.
Select Network, and then press the
v
button.
3.
Select Network Settings, and then
press the v button.
4.
Select Wireless in the Network
Settings screen, and then press the
v
button. The player searches for
and then displays a list of the
available networks.
m
Move " Select '
Return
Network Settings
Select your network type.
Network Type Wireless
Wireless network
Network Type Wireless
Wireless network
Add Network
You can connect your Blu-ray
player to the internet. Please
select which wireless network
to use.
WPS(PBC) Search
5.
Select the desired network, and
then press the v button.
6.
On the Security screen, enter your
network's Security Code or Pass
Phrase.
Enter numbers directly using the
number buttons on your remote
control. Enter letters by selecting
a letter with an arrow button, and
then pressing v button.
7.
When done, select done and then
press the v button. The player
verifies the network connection
and then connects to the network.
8.
When verification is complete,
select OK, and then press the v
button.
✎
NOTES
`
You should be able to find the Security
Code or Pass Phrase on one of the set
up screens you used to set up your
router or modem.
Ğ
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set
the Network Settings values manually.
1.
Follow the directions in Wireless -
Automatic through Step 5.
2.
The player searches for a network,
and then displays the connection
failed message.
3.
On the bottom of the screen,
select IP Settings, and then press
the v button.
The IP Settings screen appears.
4.
Select the IP Setting field, and then
press the v button.
5.
Select Enter manually in the IP Setting
field, and then press the v button.
6.
Select a value to enter (IP Address,
for example), and then press v
button. Use the number keypad
on your remote control to enter the
numbers for the value. Use the ◄►
buttons on the remote control to
move from entry field to entry field
within a value. When done with one
value, press the v button.
7.
Press the ▲ or ▼ button to
move to another value, and then
enter the numbers for that value
following the instructions in Step 6.
8.
Repeat Steps 6 and 7 until you
have filled in all values.
✎
NOTES
`
You can get the Network values from
your Internet provider.
9.
When finished, and then press the
返回
or 退出 button. The Security
Screen appears.
10.
On the Security screen, enter your
network's Security Code or Pass
Phrase. Enter numbers directly using
the number buttons on your remote
control. Enter letters by selecting a
letter with the ▲▼◄► buttons, and
then pressing the v button.
11.
When finished, select done at the
right of the screen, and then press
the v button.
The player verifies the network
connection and then connects to
the network.
12.
After the player verifies the network,
select OK, and then press the v
button.
Ğ
WPS(PBC)
1.
In the Home screen, select Settings,
and then press the v button.
2.
Select Network, and then press
the v button.
3.
Select Network Settings, and
then press the v button.
4.
Select Wireless in the Network Settings
screen, and then press the v button.
5.
Press the ▲▼ button on your
remote, and then press the ◄►
button to select the WPS(PBC).
6.
Press the v button on your
remote. The "Press the PBC
button" message appears.
14