Samsung 蓝光播放器 BD-H5900 Manuel D’Utilisation
7.
Press the WPS(PBC) button on your
router within two minutes. Your player
automatically acquires all the network
settings values it needs and connects
to your network.
The Network Status screen appears.
The player connects to the network
after the network connection is verified.
Ğ
WPS(PIN)
Before you begin, open the router's
setup menu on your PC and access the
screen with the WPS PIN entry field.
1.
In the Home screen, select Settings,
and then press the v button.
2.
Select Network, and then press the
v
button.
3.
Select Network Settings, and then
press the v button.
4.
Select Wireless in the Network
Settings screen, and then press the
v
button.
The player searches for and then
displays a list of the available
networks.
5.
Select the desired network, and then
press the ► button.
6.
Select the WPS(PIN), and then
press the v button. The PIN pop-
up appears.
7.
Enter the PIN into the WPS PIN entry
field in the router's Set Up screen
and then save the the screen.
✎
NOTES
`
Contact the manufacturer of the router
for instructions explaining how to access
the route's Set Up screens or refer to the
router's user's manual.
`
For WPS connection, set your wireless
router’s security encryption to AES.
Setting to WEP security encryption does
not support WPS connection.
Network Test
Use this menu item to check whether your
Use this menu item to check whether your
network connection is working or not.
Network Status
Use to check whether a connection to
Network Status
Use to check whether a connection to
a network and the Internet has been
established.
Wi-fi direct
The Wi-Fi Direct function allows you
Wi-fi direct
The Wi-Fi Direct function allows you
to connect Wi-Fi Direct devices to the
player and each other using a peer-to-
peer network, without a wireless router.
✎
NOTES
`
Some Wi-Fi Direct devices may not
support the AllShare function if connected
via Wi-Fi Direct. If this is the case, it
is advisable to change the network
connection method between devices.
`
Bluetooth transmissions can interfere
with the Wi-Fi Direct signal. Before you
use the Wi-Fi Direct function, we strongly
recommend that you turn off the Bluetooth
function of any active mobile device.
1.
Turn on the Wi-Fi direct device and
activate its Wi-Fi Direct function.
2.
In the Home screen, select Settings,
and then press the v button.
3.
Select Network, and then press the
v
button.
4.
Select Wi-fi direct, and then press
the v button.
The Wi-Fi Direct devices that you
can connect appear.
5.
You have three ways to complete
the Wi-Fi connection:
• Through the Wi-Fi device.
• Through the player using PBC.
• Through the player using a PIN.
Each is covered below.
Through the Wi-Fi Device
Through the Wi-Fi Device
1.
On the Wi-Fi device, follow the
procedure on the device for
connecting to another Wi-Fi Direct
device. See the device's user manual
for instructions.
2.
When you have completed the
procedure, you should see a pop-
up on your TV screen saying that a
device that supports Wi-Fi Direct has
requested to connect. Select OK, and
then press the v button to accept.
3.
The Connecting pop-up appears,
followed by the Connected pop-
up. When it closes, you should see
the device listed on the Wi-Fi Direct
screen as connected.
Through the Player Using PBC
1.
Select the Wi-Fi Direct device you
want to connect to this player, and
then press the v button. The
PBC/PIN pop up appears.
2.
Select PBC, and then press the
v
button. The PBC pop-up
appears.
3.
Press the PBC button on the Wi-Fi
Direct device within 2 minutes.
4.
The Connecting pop-up appears,
followed by the Connected pop-
up. When it closes, you should see
the device listed on the Wi-Fi Direct
screen as connected.
Through the Player Using a PIN
1.
Select the Wi-Fi Direct device you
want to connect to this player, and
then press the v button. The
PBC/PIN pop up appears.
2.
Select PIN, and then press the
v
button. The PIN pop-up
appears.
3.
Note the PIN code in the pop-
up, and then enter it into the
appropriate field in the Wi-Fi Direct
device you want to connect.
4.
The Connecting pop-up appears,
followed by the Connected pop-
up. When it closes, you should
see the device listed on the Wi-Fi
Direct screen as connected.
✎
NOTES
`
The current wired or wireless
network connection will be
disconnected when you use the Wi-
Fi Direct function.
`
Text files, such as files with a .TXT
or .DOC extension, will not display
when you are using the Wi-Fi Direct
function.
15