Samsung RF56M9540SR Manuel D’Utilisation

English  65 

Maintenance

3.  Insert a new filter cartridge. Use only 

Samsung-provided or -approved filters.

4.  Turn the cartridge knob clockwise to 

lock into place.

5.  On the Home screen, tap Fridge 

Manager > Fridge Settings > Water 
Filter, and then select Reset.
The filter indicator turns blue.

6.  When replacing is complete, open the 

water valve and run water through the 
dispenser for about 7 minutes. This is 
to remove impurities and air from the 
water line.

NOTE

•  A newly installed filter may cause the water dispenser to spurt water briefly. This is 

because of air entering the waterline.

•  This replacement process cause the refrigerator to drip water onto the floor. Simply 

wipe up with dry cloths.

Reverse osmosis water filtration system
The water pressure of the water supply system to a reverse osmosis water filtration 
system must be between 35 psi and 120 psi (241 kPa and 827 kPa).
The water pressure of the reverse osmosis water filtration system to the refrigerator’s 
cold water line must be at least 40 psi (276 kPa). If the water pressure is below the 
specified:
•  Check if the sediment filter in the reverse osmosis system is blocked. Replace the filter 

if necessary.

•  Refill the water tank in the reverse osmosis system with water.
•  If your refrigerator has a water filter, it may further reduce the water pressure when 

used in conjunction with a reverse osmosis system. Remove the water filter.

For more information or servicing, contact a licensed plumbing professional.

Untitled-1   65

2017-03-06     4:59:02