Samsung RF905QBLASL Manuel D’Utilisation
14_
setting up
GETTING READY TO INSTALL THE
REFRIGERATOR
REFRIGERATOR
Congratulations on your purchase of the Samsung
Refrigerator. We hope you enjoy the state-of-art
features and efficiencies that this new appliance
offers.
Refrigerator. We hope you enjoy the state-of-art
features and efficiencies that this new appliance
offers.
Selecting the best location for the
Refrigerator
Refrigerator
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with level (or nearly level) flooring.
• A location with enough space for the
• A location without direct exposure to sunlight.
• A location with level (or nearly level) flooring.
• A location with enough space for the
Refrigerator doors to open easily.
• Allow sufficient space to the right, left, back and
top for air circulation.
If the Refrigerator does not have enough space,
the internal cooling system may not work
properly.
If the Refrigerator does not have enough space,
the internal cooling system may not work
properly.
• Please ensure that appliance can be moved
freely in the event of maintenance & service.
• Do not install the refrigerator in locations where
the temperature is over 43 °C (109 °F) or below
5 °C (41 °F).
5 °C (41 °F).
A
A
B
B
C
C
D
D
E
E
Depth “A”
908 mm
Width “B”
908 mm
Height “C”
1822 mm
Overall Height “D”
1850 mm
1519 mm
305.5 mm
125°
125°
50 mm
908 mm
785 mm
72.3 mm
43 mm
1260 mm
• Each measurement based on the design
dimension, so it may differ depending on
the measuring method.
the measuring method.
When moving your refrigerator
To prevent floor damage be sure the front leveling
legs are in the up position(above the floor).
Refer to “HOW TO LEVEL THE REFRIGERATOR”
in the manual (at page 17).
legs are in the up position(above the floor).
Refer to “HOW TO LEVEL THE REFRIGERATOR”
in the manual (at page 17).
FLOORING
For proper installation, this refrigerator must be
placed on a level surface of hard material that is
the same height as the rest of the flooring.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the finish of the flooring, cut a large
section of the cardboard carton and place under
the refrigerator where you are working. When
moving, be sure to pull the unit straight out and
push back in straight.
placed on a level surface of hard material that is
the same height as the rest of the flooring.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the finish of the flooring, cut a large
section of the cardboard carton and place under
the refrigerator where you are working. When
moving, be sure to pull the unit straight out and
push back in straight.
setting up your refrigerator
DA68-02836A-06.indb 14
2016. 6. 25. �� 8:51