Samsung RF260BEAESP Manuel D’Utilisation
setting up
_11
01 SETTING
UP
Remove the screw (
5.
6 ) attached to the
lower left and right door hinges with a philips
screwdriver (+). Remove the 2 hex head bolts
( 7 ) attached to the lower left and right door
hinges with an allen wrench 5 mm. Remove
the lower left and right door hinges ( 8 ).
screwdriver (+). Remove the 2 hex head bolts
( 7 ) attached to the lower left and right door
hinges with an allen wrench 5 mm. Remove
the lower left and right door hinges ( 8 ).
DISASSEMBLE THE FLEX DOOR
Take out the upper drawer by lifting it up.
1.
Take out the lower basket (
2. 1 ) by lifting the
basket up from the rail system.
Press the fi xing hook of rail system.
3.
After holding and pulling out the top of Freezer
4.
Door, remove it at the rail system.
Make sure there is no scratch at the end of
Sliding Rail by being dented from the fl oor.
Sliding Rail by being dented from the fl oor.
Make sure that you mount the freezer
basket in the right position when removing
/ installing the freezer door. Failing to do
so may result in the door not opening or
closing properly.
Do not overload the bottom basket or
the top drawer. Overloading prevents the
Freezer drawer from closing properly and
will eventually cause frost build-up.
basket in the right position when removing
/ installing the freezer door. Failing to do
so may result in the door not opening or
closing properly.
Do not overload the bottom basket or
the top drawer. Overloading prevents the
Freezer drawer from closing properly and
will eventually cause frost build-up.
ASSEMBLE THE FREEZER
DRAWER
DRAWER
To reattach the drawer after you have moved
the fridge to its fi nal location, assemble parts in
reverse order.
the fridge to its fi nal location, assemble parts in
reverse order.
CAUTION
CAUTION
Allen wrench
Allen wrench
8
6
7
1
DA68-02616B(0.0).indb 11
DA68-02616B(0.0).indb 11
2012.6.15 7:47:36 PM
2012.6.15 7:47:36 PM