Samsung RF260BEAESP Manuel D’Utilisation
setting up
_09
01 SETTING
UP
Setting up your French Door
Refrigerator
Refrigerator
GETTING READY TO INSTALL
THE REFRIGERATOR
THE REFRIGERATOR
Congratulations on your purchase of this Samsung
French Door Refrigerator.
We hope you enjoy the state-of-art features and
effi ciencies that this new appliance offers.
French Door Refrigerator.
We hope you enjoy the state-of-art features and
effi ciencies that this new appliance offers.
Selecting the best location for the
refrigerator
refrigerator
A location with easy access to a water supply.
•
A location without direct exposure to sunlight.
•
A location with a leveled fl oor.
•
A location with enough space for the
•
refrigerator doors to open easily.
A location that allows suffi cient space to the
A location that allows suffi cient space to the
•
right, left, back and top for air circulation.
A location that allows you to move the
A location that allows you to move the
•
refrigerator easily if it needs maintenance or
service.
service.
Allow clearance to the right, left, back and top
•
when installing. This will help reduce power
consumption and keep your energy bills lower.
Do not install the refrigerator where the
consumption and keep your energy bills lower.
Do not install the refrigerator where the
•
temperature will go below 10 ºC.
Do not locate the refrigerator where it may
Do not locate the refrigerator where it may
•
become wet.
When moving your refrigerator
To prevent fl oor damage, be sure the front
adjusting legs are in the up position (above
the fl oor). Refer to ‘Adjusting the Level’ in
the manual (on page 12).
adjusting legs are in the up position (above
the fl oor). Refer to ‘Adjusting the Level’ in
the manual (on page 12).
FLOORING
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the fl oor. This surface
should be strong enough to support a fully loaded
refrigerator, or approximately 150 kg.
To protect the fi nish of the fl ooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull
and push it straight forwards or back.
Do not wiggle it from side to side.
refrigerator on a level, hard surface that is the
same height as the rest of the fl oor. This surface
should be strong enough to support a fully loaded
refrigerator, or approximately 150 kg.
To protect the fi nish of the fl ooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull
and push it straight forwards or back.
Do not wiggle it from side to side.
CAUTION
5 cm
5 cm
10 cm
10 cm
5 cm
5 cm
DA68-02616B(0.0).indb 09
DA68-02616B(0.0).indb 09
2012.6.15 7:47:27 PM
2012.6.15 7:47:27 PM