Samsung DV6000 Kuivausrumpu, 9 kg Manuel D’Utilisation

Page de 260
Troubleshooting
English  43 
Problem
Solution
Dries unevenly.
•  Seams, pockets, and other similarly heavy areas may not 
be completely dry when the rest of the load has reached 
the selected dryness level. This is normal. Select the EXTRA 
DRY   setting if desired.
•  If one heavy item is dried with a lightweight load, such as 
one towel with sheets, it is possible that the heavy item 
will not be completely dry when the rest of the load has 
reached the selected dryness level. Sort heavy items from 
lightweight items for best drying results.
Has an odour.
•  Household odors from painting, varnishing, strong 
cleaners, etc. may enter the dryer with the surrounding 
room air. This is normal as the dryer draws the air from 
the room, heats it, pulls it through the tumbler, and 
exhausts it outside.
•  When these odors linger in the air, ventilate the room 
completely before using the dryer. 
Shuts off before load is 
dry.
•  Dryer load is too small. Add more items or a few towels 
and restart the cycle.
•  Dryer load is too large. Remove some items and restart the 
dryer.
Lint on clothes.
•  Make sure the case filter is cleaned before every load. 
With some loads that produce high amounts of lint, it may 
be necessary to clean the filter case during the cycle.
•  Some fabrics are lint producers (for example, a fuzzy white 
cotton towel) and they should be dried separately from 
clothes that are lint trappers. (for example, a pair of black 
linen pants)
•  Divide larger loads into smaller loads for drying
•  Check pockets thoroughly before drying and drying 
clothes.
Garments still wrinkled 
after Wrinkle Prevent.
•  Small loads of 1 to 4 items work best.
•  Load fewer garments. Load similar-type garments.
Odours remain in 
clothing after Cool air.
•  Fabrics containing strong odors should be washed.
DV6000K_DE68-03709B_EN (Scandinavia)_160401.indd   43
2016-04-01     2:54:42