Samsung RFG28MESL Manuel D’Utilisation

setting up _11

01 SETTING

1. Locate the height-adjuster ( 1 ) in the freezer

drawer.
Unscrew the four Phillips screws ( 2 ) slightly to
loosen the door.

2. Loosen the controller screw ( 3 ) with a Phillips

screwdriver.

3. Find the best level to align the door slope.

Example)

The slope is about 2mm (0.08inch) as shown below.

Example)

The slope is about 2mm (0.08inch) as shown below.

Rotate the Height Adjuster to -2.0 to reduce the door slope.

Slope

Reference

plane

After adjustment, ﬁ rst tighten screw ( 3 ) and
then screw ( 2 ) .

CHECKING THE WATER LINE

A water dispenser is one of the helpful features on
your new Samsung Refrigerator. To help promote
better health, the Samsung water ﬁ lter removes
unwanted particles from your water.

MAKING MINOR ADJUSTMENTS
BETWEEN DOORS

Remember a level Refrigerator is necessary for
getting the doors perfectly even. If you need
help, review the previous section on leveling the
Refrigerator.

Fixed

Part

Adjustment

Adjustment
part

part

1. If you open the drawer ( 1 ), you can see the

lower hinge ( 2 ) .

2. Insert a philips screwdriver (+) ( 3 ) into the shaft

( 4 ) of the lower hinge.

3. Adjust the height by turning a philips screwdriver

(+) ( 3 ) clockwise (

DOWN

) or counterclockwise

(

When you turn a philips screwdriver (+)
counterclockwise (

), the door will

move up.

ADJUSTING THE FREEZER
DRAWER LEVEL

Freezer Drawer

Adjustment part

DA99-03404A-13.indd 11

2015. 5. 7.

7:35

2015. 5. 7.

7:35