Samsung RFG28MESL Manuel D’Utilisation
setting up _09
01 SETTING
UP
When reassembling it, be sure to connect the
wire harness.
wire harness.
If it is not connected, the Flex Room does not
work.
work.
4. Remove 2 hex head bolts from sides with a
socket wrench (10 mm)
5. Lift up the Flex door from the rails.
Putting too much food into the freezer
drawers can prevent the freezer from closing
completely and can cause frost build-up.
drawers can prevent the freezer from closing
completely and can cause frost build-up.
ASSEMBLE THE FLEX DOOR
To reattach the fl ex door,assemble parts in reverse
order.
order.
Be sure to connect the Flex Door Wire
Connector.
Connector.
If it is not connected, the Flex Room does not
work.
work.
CAUTION
CAUTION
CAUTION
REATTACHING THE
REFRIGERATOR DOORS
REFRIGERATOR DOORS
To reattach the fridge doors, assemble parts in
reverse order.
reverse order.
1. The Water Line must be fully inserted to the
center of transparent coupler (Type A) or the
Guide Lines (Type B) to prevent water leakage
from the dispenser.
Guide Lines (Type B) to prevent water leakage
from the dispenser.
Center of Transparent coupler
Center of Transparent coupler
The Guide Lines
The Guide Lines
Dispenser
Dispenser
Type A
Type A
Type B
Type B
DISASSEMBLE THE FLEX DOOR
1. Take out the Flex Zone ( 1 ) by lifting it up.
1
2. Take off the cover ( 2 ) w/harness with a fl at-
blade screwdriver (-).
2
3. Press the locking tab and separate the Wire
Connector.
DA99-03404A-13.indd 09
DA99-03404A-13.indd 09
2015. 5. 7.
7:35
2015. 5. 7.
7:35