Samsung RFG28MESL Manuel D’Utilisation

08_

 

setting up

2.  Disconnect two connectors ( 3 ) at each side of 

the top cap and the one connector ( 4 ) on left 
side door. Remove the tube ( 5 ) with pressing the 
dark gray color part ( 6 ) of the water line coupler. 

 

5

 

6

 

4

 

3

3.  Remove the 3 hex head bolts ( 7 ) attached to 

the upper left and right door hinges with a socket 
wrench (10 mm). Remove the ground screw ( 8 ) 
attached to the upper left and right door hinges 
with a philips screwdriver(+). Remove the upper 
left and right door hinges ( 9 ).

Socket wrench

Socket wrench

7

9

8

4.  Lift the door straight up to remove.

5.  Remove the screw ( 10 ) attached to the 

lower left and right door hinges with a philips 
screwdriver(+). Remove the 2 hex head bolts ( 11 ) 
attached to the lower left and right door hinges 
with an allen wrench (3/16”). Remove the lower 
left and right door hinges ( 12 ).

Allen wrench

Allen wrench

12

10

11

REMOVING THE 
REFRIGERATOR DOORS

If the Refrigerator is too large to pass through your 
doorway easily, you can remove the refrigerator 
doors.

Disconnect power to the refrigerator before 
removing the door or drawer.

•  Be careful not to drop, damage or scratch 

the door/drawer while removing them.

•  Be careful not to get injured while removing the 

door/drawer.

•  Reattach the door/drawer properly to avoid:
-  Moisture from air leakage.
-  Uneven door alignment.
-  Wasting energy due to improper door seal.

Tools you will need (Not provided)

Philips 

screwdriver (+)

Flat-blade 

screwdriver (-)

Socket wrench 

(10 mm)

Pliers

Allen wrench 

(3/16”) (5 mm)

Disassemble the Refrigerator doors

1.  With the door opened, remove the Hinge Cover 

cap ( 1 ) with a Flat head screwdriver, and close 
the door. Remove the 3 screws holding down the 
Hinge Cover and remove the Hinge Cover ( 2 ) .

1

2

WARNING

DA99-03404A-13.indd   08

DA99-03404A-13.indd   08

2015. 5. 7.   

 7:35

2015. 5. 7.   

 7:35