Alcatel-Lucent OmniAccess 3500 Mode D'Emploi
Chapter
4.
Installation
I
NSTALL
A
PPLIANCE
H
ANDLES
NOTE: The handles are required to hold the bezel on. If you will not be installing a
bezel, you do not need to install the handles.
1. Slide a handle (Figure 10, A) between the appliance and the appliance bracket.
2. Align the hole in the handle with the unused hole in the appliance bracket.
3. Install a spacer (B) between the handle and the appliance bracket.
4. Install and tighten screw (C) to secure the handle.
5. In the same manner, attach the other handle to the opposite side.
You have completed the installation of your appliance in a four-post rack system.
bezel, you do not need to install the handles.
1. Slide a handle (Figure 10, A) between the appliance and the appliance bracket.
2. Align the hole in the handle with the unused hole in the appliance bracket.
3. Install a spacer (B) between the handle and the appliance bracket.
4. Install and tighten screw (C) to secure the handle.
5. In the same manner, attach the other handle to the opposite side.
You have completed the installation of your appliance in a four-post rack system.
Figure 10: Attaching an appliance handle to a front post
15