Alcatel-Lucent OmniAccess 3500 Mode D'Emploi
OmniAccess 3500 Nonstop Laptop Guardian Gateway Installation Guide
I
NSTALL
A
PPLIANCE IN
R
ACK
Caution: Lifting the appliance and attaching it to the rack is a two-person job. If
needed, use an appropriate lifting device.
1. Locate one person at the front of the rack and one at the rear.
2. Position the appliance so that the L brackets (Figure 19, A) are inserted into the
needed, use an appropriate lifting device.
1. Locate one person at the front of the rack and one at the rear.
2. Position the appliance so that the L brackets (Figure 19, A) are inserted into the
appliance mounting brackets (B).
3. While supporting the weight of the appliance, adjust the L brackets to fit tightly
into the appliance brackets (C).
Figure 19: L brackets inserted into appliance mounting brackets (rear view)
4. Slide the appliance toward the rear of the rack until the front of the appliance
brackets contact the front of the center posts.
5. Using the fasteners (Figure 20, C) supplied with your rack, attach the front of the
mounting brackets to the front of the center posts.
24