Alpine CDE-9882RI Manuel D’Utilisation
18
-EN
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Sound Customizing, Visual
Customizing, etc., can be modified.
usage. From the SETUP menu, Sound Customizing, Visual
Customizing, etc., can be modified.
1
Press and hold F/SETUP for at least 2 seconds to
activate the SETUP mode.
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired
SETUP menu, and then press
SETUP menu, and then press
/ENT.
(e.g. Select POWER IC)
BLUETOOTH IN*
1
FM-LEVEL
RDS REGIONAL*
2
PI SEEK*
3
ALERT PTY31*
4
ILLUMINATION
LCD CONTRAST
DIMMER
PLAY MODE
SCROLL TYPE
TEXT SCROLL
INT MUTE*
5
AUX+ SETUP
AUX+ NAME*
6
AUX IN GAIN*
6
POWER IC
LANGUAGE
DEMO
BLUETOOTH IN
*
1
Displayed only when INT MUTE is set to OFF, and the mode is set to
other than BT AUDIO.
other than BT AUDIO.
*
2
Refer to “Receiving RDS Regional (Local) Stations” (page 9).
*
3
Refer to “PI SEEK Setting” (page 10).
*
4
Refer to “Setting PTY31 (Emergency Broadcast) reception”
(page 10).
(page 10).
*
5
Displayed only when BLUETOOTH IN is OFF.
*
6
Displayed only when AUX+ SETUP is ON.
3
Turn the Rotary encoder to change the setting.
(e.g. Select POWER IC ON or POWER IC OFF.)
4
Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
return to normal mode.
• Press
/ESC to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting the Bluetooth Connection
If an optional Bluetooth Box is connected, you can place a hands-free
call by a Bluetooth-equipped mobile phone.
Make this setting when the Bluetooth Box is connected and the
Bluetooth function is used. For details, refer to the Owner’s Manual of
the optional Bluetooth Box.
Set ADAPTE when the Bluetooth Box is connected.
call by a Bluetooth-equipped mobile phone.
Make this setting when the Bluetooth Box is connected and the
Bluetooth function is used. For details, refer to the Owner’s Manual of
the optional Bluetooth Box.
Set ADAPTE when the Bluetooth Box is connected.
• If the Bluetooth Box compatible with the Voice Dial function is
connected, the Voice Dial function can be used.
Adjusting Source Signal Levels
If the difference in volume level between the CD player and FM radio is
too great, adjust the FM signal level.
too great, adjust the FM signal level.
Changing Lighting Colour
TYPE1
TYPE2
• CDE-9880R:
You can change the lighting colour of the unit’s buttons.
You can change the lighting colour of the unit’s buttons.
• CDE-9882Ri:
You can change the lighting colour of the following six buttons.
SOURCE/
You can change the lighting colour of the following six buttons.
SOURCE/
, BAND/TA,
,
,
,
.
Adjusting Display Contrast
You can adjust the display contrast for better visibility.
• The initial setting at the factory is “0”.
SETUP
Use steps 1 to 4 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
modify. See the applicable section below for details
about the selected SETUP item.
Rotary encoder
/ESC
/ENT
F/SETUP
SOURCE/
BLUETOOTH IN
BT IN ADAPTE / BT IN OFF (Initial setting)
Sound Customizing
FM-LEVEL HI (Initial setting) / FM-LEVEL LOW
Visual Customizing
ILLUMI TYPE1 (initial setting) / ILLUMI TYPE2
TYPE1: The colour of the unit’s buttons is green.
TYPE2: The colour of the unit’s buttons is amber
TYPE1: When the colour of the six buttons is blue, the colour of
the other is red.
TYPE2: When the colour of the six buttons is red, the colour of
the other is red.
CONTRAST
You can adjust in a range of –5 and +3.