Akai mpc3000 Manuel D’Utilisation

Selecting option 3 from the MIDI key menu presents the MIDI
Input Filter screen, which allows specific types of MIDI events to be
either received or ignored by the MPC3000:

===== Sound Generator Input Filter =====
MIDI volume:RECEIVE     MIDI vol now:127
Prog change:IGNORE
======= Sequencer Input Filter =========
Event:NOTES
Pass event?:YES         Min change:5
Velocity mode:NORMAL    Fixed veloc: 64
========================================

There are two sections, the Sound Generator Input Filter and the
Sequencer Input Filter. The fields are:

• The 

MIDI volume

 field:

This choice field has two options: 

RECEIVE

 and 

IGNORE

. If set to

RECEIVE

, incoming MIDI volume messages (controller 7) will

affect the sound generator’s overall output volume on all outputs. If
set to 

IGNORE

, incoming MIDI volume messages will be ignored.

• The 

MIDI vol now

 field:

This field shows the last value of MIDI volume (controller 7)
received. A value of 127 is normal (no attenuation). Any value less
than 127 causes the volume of all outputs to be attenuated from
normal. A VALUE OF ZERO WILL SILENCE ALL AUDIO
OUTPUTS EVEN IF ALL OTHER PARAMETERS ARE SET
CORRECTLY!

• The 

Prog change

 field:

This choice field has two options: 

RECEIVE

 and 

IGNORE

. If set to

RECEIVE

, incoming Program Change messages will automatically

select the active program. (Incoming Program Change messages
above program 24 will select program 24.) If set to 

IGNORE

, incom-

ing Program Change messages will be ignored.

• The 

Event

 and 

Pass event?

 fields:

The 

Event

 field is a choice field and can be set to any one of the

following event types: