Akai mpc3000 Manuel D’Utilisation

• The 

Loop

 field:

In this field enter the loop status (

OFF

 or 

TO BAR

) and the loop bar

number, if 

TO BAR

 is selected, for the initialized sequence.

• The 

Track

 field:

Any or all of the sequence’s tracks can be initialized. To enter the
settings for each track, first select the track number in this field,
then enter the initialization data for that track in the fields below.
The contents of the five fields in this section apply only to the track
(1 of 99) that is selected in this field.

• The 

Status

 field:

This is a choice field with two options:

1. 

UNUSED

: The track number displayed in the 

Track

 field

will not be initialized. Instead, it will be set to an unused
state (as when power is turned on), which requires the
least amount of memory. However, if this track is later
recorded into, it will immediately be initialized to default
values.

2. 

IN USE

: The track number displayed in the 

Track

 field

will be initialized to the values entered in the 

Type

, 

Pgm

and 

Chn

 fields.

• The 

Type

 field:

The 

Type

 field for the selected track will be initialized to the option

selected in this field (

DRUM

 or 

MIDI

).

• The 

Pgm

 field:

The 

Pgm

 field for the selected track will be initialized to the option

selected in this field (1-128 or OFF).

• The 

Chn

 field:

In this field enter the output MIDI channel (1-16 or OFF) and port
(A-D) to which the selected track will be initialized, using the same
data entry method as in the 

Chn

 field in the Play/Record screen. To

the right of this field is another field for the auxiliary MIDI output
channel assignment.

• The 

<Do it>

 soft key:

After values for all the fields have been entered, press this soft key
to initialize the sequence.