3com WX2200 3CRWX220095A Manuel D’Utilisation

C

HAPTER

 13: C

ONFIGURING

 U

SER

 E

NCRYPTION

Table 24 lists the encryption support for WPA and non-WPA clients. 

To configure MAP radios to support WPA:

1 Create a service profile for each SSID that will support WPA clients.

2 Enable the WPA IE in the service profile.

3 Enable the cipher suites you want to support in the service profile. (TKIP is 

enabled by default.) Optionally, you also can change the countermeasures 
timer value for TKIP.

4 Map the service profile to the radio profile that will control IEEE settings 

for the radios. 

5 Assign the radio profile to the radios and enable the radios.

If you plan to use PSK authentication, you also need to enable this 
authentication method and enter an ASCII passphrase or a hexadecimal 
(raw) key.

Table 24   Encryption Support for WPA and Non-WPA Clients

Supports

Supports

Supports

Supports

Supports

Supports

Supports

Supports

Supports