3com WX1200 3CRWX120695A Manuel D’Utilisation

You can clear all Network Domain configuration from a WX switch, 
regardless of whether the WX switch is a seed or a member of a Network 
Domain. You may want to do this in order to change a WX switch from 
one Network Domain to another, or to remove a WX switch entirely from 
a Network Domain. 

To clear the Network Domain configuration from the WX switch, type the 
following command:

This command has no effect if the WX switch is not configured as part of 
a Network Domain.

You can remove individual Network Domain seeds from a WX switch’s 
configuration. To remove a specific Network Domain seed, type the 
following command:

clear network-domain seed-ip ip-addr

When you enter this command, the Network Domain TCP connections 
between the WX switch and the specified Network Domain seed are 
closed.

On a WX switch configured as a Network Domain seed, you can clear the 
configuration of individual Network Domain peers. To remove a specific 
Network Domain peer from a Network Domain seed, type the following 
command:

clear network-domain peer ip-addr

This command has no effect if the WX switch is not configured as a 
Network Domain seed.

You can remove the Network Domain seed or member configuration 
from the WX switch. To do this, enter the following command:

clear network-domain mode {seed | member}

Use the seed parameter to clear Network Domain seed configuration 
from the WX switch. Use the member parameter to clear Network 
Domain member configuration from the WX switch.