3com WX1200 3CRWX120695A Manuel D’Utilisation

To use RSN, at least one cipher suite must be enabled. You can enable 
one or more of the following cipher suites:

„

CCMP

„

TKIP

„

40-bit WEP

„

104-bit WEP

By default, TKIP is enabled and the other cipher suites are disabled. 

To enable or disable cipher suites, use the following commands:

set service-profile name cipher-ccmp {enable | disable}
set service-profile name cipher-tkip {enable | disable}
set service-profile name cipher-wep104 {enable | disable}
set service-profile name cipher-wep40 {enable | disable}

To enable the CCMP cipher suite in service profile rsn, type the following 
command:

WX1200# set service-profile rsn cipher-ccmp enable
success: change accepted.

After you type this command, the service profile supports both TKIP and 
CCMP.