ADC DL3XR-FCA100 Manuel D’Utilisation
LTPS-UM-8013-03
Remote
Configuration
D3LX CO and RMT Modules
August 30, 2002
33
R
EMOTE
C
ONFIGURATION
Use the D3RCAM craft interface system menu to view or edit the configuration for each D3LX RMT module in
the chassis. This menu can also be used to equip, provision, assign thresholds, and assign service state. The
D3RCAM Configuration menu is shown in
the chassis. This menu can also be used to equip, provision, assign thresholds, and assign service state. The
D3RCAM Configuration menu is shown in
.
1
Connect a maintenance terminal to the craft port on the D3RCAM front panel. Logon to the craft interface
system as described in
system as described in
The Main Menu appears, as shown in
. If the Main Menu does not appear, check the terminal
communication parameters (or computer software interface) and retry this procedure.
Figure 20.
D3RCAM Craft Interface Main Menu