Avaya office 5410 Manuel D’Utilisation

Page 42 - Function Key Programming 

Function Keys 

Page 42 - Function Keys 

IP Office 5410 User’s Guide  

Function Key Programming 

40DHB0002UKEY – Issue 1 (7th February 2005) 

Place the current call on hold at the central office. This function is not supported in the 
USA. 
If no exchange slot number is specified when the function is programmed, central office 
slot 0 is used.   
Pressing 

 Hold is only supported if the central office provides a Q.931 hold facility. It 

is not the same as local hold provided by the IP Office. 
 

See also:  
•  Rtriv - Retrieve Call on page 52.  
  

Place the current call on hold and connects any call waiting. This function is not 
supported in the USA. 
This function does not required any data to be entered when programmed. This 
function cannot be programmed through the phone by the user.  
Pressing 

 HoldCW places the current call on hold and connects any call waiting 

without any ringing.  
 

[User | Digital Telephony | Advanced | Hold | Hold CW] 
  

Connects call to the extension without ringing.  
This function requires entry of an extension number when programmed. The target 
extension must be support handsfree operation. This function cannot be programmed 
through the phone by the user.  
Press 

 IAuto connects the call without any ringing at the remote extension. If the 

target extension is busy or not available, the call will follow any forwarding or diversion 
to voicemail set.  
 

[User | Digital Telephony | Emulation | Automatic Intercom] 
  

Sets the ringing pattern (sequence) used for internal calls.  
This function is currently not supported on the 5410 telephone. 
 

The same as IAuto - Automatic Intercom on page 43. This function cannot be 
programmed through the phone by the user.  
 

[User | Digital Telephony | Emulation | Dial Intercom] 

  

Intrudes on a call in progress at the target extension.  
This function is currently not supported on the 5410 telephone.