HP color laserjet 2550 series Instruction De Maintenance

Occasionally, paper or other print media can become jammed during a print job. Causes
include the following:

●

Input trays are loaded improperly or are overfilled.

●

Media guides in the input trays are not set correctly.

●

Optional tray 2 or optional tray 3 is removed during a print job.

●

The top cover is opened during a print job.

●

The tabs on the fuser are unlocked or the fuser is not seated correctly.

●

Too many sheets have accumulated in an output area or blocked an output area.

●

The media being used does not meet HP specifications. See the HP Color LaserJet
2550 Series Printer User Guide for information about print-media specifications.

●

The environment in which the paper was stored is too humid or too dry. See the
HP Color LaserJet 2550 Series Printer User Guide for information about print-media
specifications.

●

Non-HP supplies are installed in the printer.

Jams can occur in these locations:

●

Inside the printer. See 

.

●

In input areas. See 

●

In output areas. See 

.

Find and remove the jam by using the instructions on the following pages. If the location of
the jam is not obvious, look first inside the printer.

Loose toner might remain in the printer after a jam. This problem should resolve itself after a
few sheets have been printed. See 

Jams in this area might result in loose toner on the page. If you get toner on your clothes or
hands, wash them in cold water. (Hot water sets toner into fabric.)

1. Open the top cover.

ENWW

Clearing jams