HP color laserjet 4500 Manuel D’Utilisation
24
Chapter 1 Troubleshooting control panel messages
EN
TRAY X SIZE [SIZE]
Media has been loaded into the specified tray. The most recently
configured size will be displayed with an asterisk next to it.
Action:
configured size will be displayed with an asterisk next to it.
Action:
1.
[– Value +]
might be used to view all possible media sizes.
2. Pressing
[Select]
will select the currently displayed size. Pressing
[Go]
will remove the message.
TRAY X TYPE [TYPE]
Media has been loaded into the specified tray. The most recently
configured type will be displayed with an asterisk next to it.
configured type will be displayed with an asterisk next to it.
1.
[– Value +]
might be used to view all possible media types.
2. Pressing
[Select]
will select the currently displayed type. Pressing
[Go]
will remove the message.
TRAY X OPEN
The specified tray is not completely closed.
l
Close the specified tray.
WARMING UP
The fuser is warming up. Printing will continue when the fuser reaches
the optimum temperature.
the optimum temperature.
l
No action is required.
WASTE TONER FULL
REPLACE DRUM KIT
REPLACE DRUM KIT
The waste toner full sensor PS13 detects a waste toner full condition.
A light receiver and light pipe arrangement, along with a window in the
drum assembly, look for a waste fill condition. Verify that sensors and
light pipes are not blocked.
A light receiver and light pipe arrangement, along with a window in the
drum assembly, look for a waste fill condition. Verify that sensors and
light pipes are not blocked.
1
Replace the drum kit.
2
Check the sensor, replace it if it’s defective.