HP color laserjet 4500 Manuel D’Utilisation
EN
Control panel messages
27
1
13.1 Jam OPEN MIDDLE FRONT DRAWER (4500)
13.5 Jam OPEN MIDDLE FRONT DRAWER (4550)
13.5 Jam OPEN MIDDLE FRONT DRAWER (4550)
alternates with
CHECK IN REAR OF DRAWER
A jam has occurred inside the ITB drawer area. (The ITB drawer is
also referred to as the middle front drawer for end users.) The jam
might be located in the fuser area or between the transfer area and the
fuser.
also referred to as the middle front drawer for end users.) The jam
might be located in the fuser area or between the transfer area and the
fuser.
1
Open the ITB drawer and carefully inspect for any media.
2
Be sure to inspect the fusing area. You might need to access the
fusing area through the rear door.
fusing area through the rear door.
3
Remove any jammed media.
Make sure that the transfer roller is securely in place
20 INSUFFICIENT MEMORY
alternates with
PRESS GO TO CONTINUE
More data has been received from the computer than fits in the
printer’s internal memory.
printer’s internal memory.
1
To continue printing, press
[Go]
. Only the amount of data that fits in
the printer’s internal memory is printed.
2
To cancel the job, press
[Cancel Job]
.
3
Add more memory to resolve the problem.
22 EIO X BUFFER OVERFLOW
lternates with
PRESS GO TO CONTINUE
The EIO buffer for the EIO card in slot “X” has overflowed during a
busy state.
busy state.
1
The current data in the print buffer will be lost.
2
Press
[Go]
to resume printing and then resend the job.