HP laserjet 2015 series Instruction De Maintenance

For best results use a sheet of transparency. If you do not have any transparencies,

you can use copier-grade media (70 to 90 g/m

2

 (18 to 24 lb.)) with a smooth surface.

Make sure that the printer is idle and the Ready light is on.

Load the transparency in tray 1.

Print a cleaning page using one of the following methods:

ł

Open HP ToolboxFX. Click the Troubleshooting tab, and then click Print Quality Tools.
Select the cleaning page.

ł

On the printer control panel, press and hold the 

Go

 button until the 

Attention

,

Ready

, and

Go

 lights come on. When all three lights come on, release the 

Go

 button.

ł

Press

Go

 again. The printer picks up the transparency and begins the cleaning process.

The cleaning process takes approximately 2 minutes. The cleaning page will stop

periodically during the cleaning process. Do not turn the printer off until the cleaning process
has finished. You might need to repeat the cleaning process several times to thoroughly clean
the printer.

ENWW

Clean the printer

45