HP laserjet 2015 series 服务手册
NOTE
For best results use a sheet of transparency. If you do not have any transparencies,
you can use copier-grade media (70 to 90 g/m
2
(18 to 24 lb.)) with a smooth surface.
1.
Make sure that the printer is idle and the Ready light is on.
2.
Load the transparency in tray 1.
3.
Print a cleaning page using one of the following methods:
ł
Open HP ToolboxFX. Click the Troubleshooting tab, and then click Print Quality Tools.
Select the cleaning page.
Select the cleaning page.
ł
On the printer control panel, press and hold the
Go
button until the
Attention
,
Ready
, and
Go
lights come on. When all three lights come on, release the
Go
button.
ł
Press
Go
again. The printer picks up the transparency and begins the cleaning process.
NOTE
The cleaning process takes approximately 2 minutes. The cleaning page will stop
periodically during the cleaning process. Do not turn the printer off until the cleaning process
has finished. You might need to repeat the cleaning process several times to thoroughly clean
the printer.
has finished. You might need to repeat the cleaning process several times to thoroughly clean
the printer.
ENWW
Clean the printer
45