HP scanjet 7400c Manuel D’Utilisation
12
Installing and troubleshooting
Connecting the scanner
Connecting the scanner
Connecting the scanner
Connecting the scanner
You must have a SCSI card installed before you install the scanning software. Then,
install the scanning software BEFORE physically connecting the scanner to the
SCSI card.
If you have other SCSI devices to connect to the SCSI card, connect the scanner to
the last device in the chain. For more information, see the documentation that came
with the SCSI card.
install the scanning software BEFORE physically connecting the scanner to the
SCSI card.
If you have other SCSI devices to connect to the SCSI card, connect the scanner to
the last device in the chain. For more information, see the documentation that came
with the SCSI card.
Testing the SCSI installation
Testing the SCSI installation
Testing the SCSI installation
Testing the SCSI installation
Test the SCSI installation to see if it is working.
To test the SCSI installation
1
Turn off the computer and disconnect the power cable from the scanner.
2
After 30 seconds, reconnect the power cable to the scanner.
3
Turn on all other external SCSI devices and then turn on the computer.
4
On the Start menu, point to Settings, and click Control Panel.
For Windows 98, 2000, and Me:
1
1
On the Start menu, point to Settings, and click Control Panel.
2
Double-click Scanners and Cameras.
3
Select your scanner model, such as the HP ScanJet 7400C, from the list and
click Properties.
click Properties.
4
Click Test Scanner or Camera.
5
When the test finishes, you receive a message indicating if the test passed or
failed. If test failed, see
failed. If test failed, see
For Windows NT 4.0:
Windows NT 4.0 does not provide an automatic method for testing the SCSI
installation. If you experience problems with the SCSI installation, see
Windows NT 4.0 does not provide an automatic method for testing the SCSI
installation. If you experience problems with the SCSI installation, see