Samsung MS8899S Manuel D’Utilisation

18

The Auto Sensor allows you to cook your food 
automatically by detecting the amount of gases 
generated from the food while cooking.

•

 When cooking food, many kinds of gases are 

generated. The Auto Sensor determines the 
proper time and power level by detecting these 
gases from the food, eliminating the need to set 
the cooking time and power level.

•

 When you cover a container with its lid or 

plastic wrap during Sensor Cooking, the Auto 
Sensor will detect the gases generated after 
the container has been saturated with steam.

•

 Shortly before cooking ends, the remaining 

cooking time will begin its count down. This will 
be a good time for you to rotate or stir the food 
for even cooking if it is necessary.

•

 Before auto sensor cooking food may be 

seasoned with herbs, spices or browning 
sauces. A word of caution though, salt or sugar 
may cause burn spots on food so these 
ingredients should be added after cooking.

•

 The MORE/LESS function pad is used to 

increase or decrease cooking time. You should 
use this function to adjust the degree of cooking 
to suit your personal taste.

•

 To obtain good cooking results with this 

function, follow the directions for selecting 
appropriate containers and covers in the charts 
in this book.

•

 Always use microwave-safe containers and 

cover them with their lids or with plastic wrap. 
When using plastic wrap, turn back one corner 
to allow steam to escape at the proper rate.

•

 Always cover with the lid intended for the 

utensil being used. If the utensil does not have 
its own lid, use plastic wrap.

•

 Fill containers at least half full.

•

 Foods that require stirring or rotating should be 

stirred or turned toward the end of the Sensor 
Cook cycle, after the time has started to count 
down on the display.

•

 After installing the oven and plugging into an 

electrical outlet, do not unplug the power cord. 
The gas sensor needs time to stabilize in order 
to cook satisfactorily.

•

 It its not advisable to use the auto sensor 

cooking feature on a continuous cooking 
operation, i.e. one cooking operation 
immediately after another.
Let the oven cool 5 minutes before using Auto 
Sensor again.

•

 Install the oven in a well ventilated location for 

proper cooling and airflow and to ensure the 
sensor will operate accurately.

•

 To avoid poor results, do not use the Auto 

Sensor when the room ambient  temperature is 
too high or too low.  

•

 Do not use volatile detergent to clean your oven. 

Gas resulting from this detergent may affect the 
sensor. 

•

 Avoid placing the oven near high moisture or 

gas emitting appliances, since this will interfere 
with the proper performance of the Auto 
Sensor.

•

 Always keep the inside of the oven clean.  

Wipe all spills with a damp cloth.

This oven is designed for household use only.

__``zT‰–‹ U”GGwˆŽŒGX_GG{œŒš‹ˆ SGqˆ•œˆ™ GYYSGYWWYGG\aXYGwt