Manualsbrain.com
  1. Manuels
  2. Marques
  3. Sony
  4. CMT-DH7BT
  5. Manuel D’Utilisation

Sony CMT-DH7BT Manuel D’Utilisation

Télécharger
Page de 92
CMT-DH7BT.GB.3-097-195-11(2)
GB
To erase all the pairing registration 
information
1 
Press FUNCTION +/ 
 repeatedly 
to select “BLUETOOTH” (or press 
BLUETOOTH  
 on the unit).
When the system is connected with a 
Bluetooth device (when the Bluetooth 
device name or other information 
appears in the system display), press 
and hold BLUETOOTH OPR 
 on 
the unit for about 2 seconds to put the 
system in Bluetooth standby mode.
2 
Press CLEAR 
.
“Delete?” appears.
3 
Press ENTER 
.
“Complete!” appears and all the 
pairing information is erased.
Note
In order to connect with a Bluetooth device 
after performing this operation, you must enter 
the passcode again.
Playing music of a Bluetooth device
You can operate a Bluetooth device by 
connecting the system and a Bluetooth 
device using AVRCP. If the system is not 
connected with a Bluetooth device using 
AVRCP, “Not In Use” appears when you 
operate the system.
1 
Select the Bluetooth function.
Press FUNCTION +/ 
 repeatedly 
to select “BLUETOOTH” (or press 
BLUETOOTH  
 on the unit).
2 
Establish a connection from the 
Bluetooth device.
For details about the operations of 
the Bluetooth device, refer to the 
operation manual supplied with your 
Bluetooth device.
Once the connection is established, 
the system display changes as follows:
“Connect”  Name of the Bluetooth 
device
3 
Start playback.
Press  
 (or BLUETOOTH  
 on the unit).
Depending on the Bluetooth device, 
you may need to start up the AV 
software of the Bluetooth device 
beforehand.
4 
Adjust the volume.
Press VOLUME +/ 
.
To check the address of a connected 
Bluetooth device
Press DISPLAY 
 while the Bluetooth 
device name appears in the system 
display.
The Bluetooth device address appears for 
8 seconds.