Sony gdm-3001pt Manuel D’Utilisation

Page de 184
7
Getting Started
Getting Started
F
EN
ES
C
Selecting the Input Signal
This monitor has two signal input connectors (HD15 and
5BNC) and can be connected to two computers. When the
power of both computers is on, select the input signal you
want to view as follows.
1
Turn on the monitor and both computers.
2
Press the 
 button.
The MENU OSD appears.
3
Press the ¨./> and >?// buttons to select “
OPTION,” and press the 
 button again.
The OPTION OSD appears.
4
Press the ¨./> buttons to select “
 (INPUT).”
5
Press the >?// buttons to select “1” or “2.”
When “1” is selected
The signal from the computer connected to the HD15
connector is input to the monitor.
When “2” is selected
The signal from the computer connected to the 5BNC
connectors is input to the monitor.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the 
 button again.
For more information on using the OSD, see “Introducing
the On-screen Display System” on page 8.
When you connect computers to both connectors
If you restart the computer you want to view, or that
computer is in power saving mode, the monitor may
automatically select the other connector‘s signal. This is
because the monitor switches from the interrupted signal to
the constant signal. If this happens, manually select the
desired signal.
MENU
EXIT
CENTER
SIZE
GEOM
COLOR
LANG
ZOOM
SCREEN
OPTION
OK
MENU
ON
MANUAL  DEGAUSS
UNLOCK
1 MIN
OPTION
ZZ...
1
ZZ...
INPUT
1 MIN
OPTION
UNLOCK
2