Sony LPR-1000MD Manuel D’Utilisation

Page de 67
P
re
parat
io
n
Preparing Paper
11
Preparing Paper
Recommended Paper
Be sure to use the paper recommended.
It is required to perform settings of Paper on the Main 
tab in the Printing Preferences dialog box.
For detailed information on settings for paper, see 
“Settings for Paper” on page 17.
Note
The number of printed pages which can be ejected the 
maximum number. In actual printing, the number of 
printed pages which can be ejected may be reduced 
depending on use environment where the printer is used.
Notes on using paper other than paper 
manufactured by Sony Corporation
• When using mat coated paper manufactured by 
another company, the number of sheets which can be 
loaded and ejected depends on the thickness of the 
paper. Thus, those numbers may be different from 
ones listed on the above table. In the case of double-
sided mat paper, the number of sheets may be about 20 
pages.
• It is recommended that you use mat coated paper with 
a thickness between 0.1mm and 0.27mm.
• You cannot use the following paper:
Plain paper whose weight is less than 60g/m
2
 or 
higher than 105g/m
2
.
Available Printing Area
To maintain the quality of print, margins are set at the 
top, bottom, right and left of the paper. The range on 
which text or images can be printed is the area inside 
these margins.
Available printing area
200 × 287 mm (width × height)
Notes on Paper
Notes on handling paper
• When holding paper, hold it at both ends of the sheet 
so as not to touch the printing surface. Dust, scratches 
or finger prints on the paper are likely to cause 
unsatisfactory printing.
• After printing, do not touch the surface printed until 
the ink dries. Also, if you wet the printed sheet with 
water, do not touch the surface printed until it dries.
• There are some types of paper whose printed surface 
warps and is rubbed when printing photos or graphics 
using a large amount of ink. This type of paper is not 
suitable for printing photos or graphics. Use this type 
of paper when printing print data consisting of 
characters or text.
When storing paper
• Use the original package for unused paper.
• Avoid storing paper in a location subject to:
– high temperatures
– high humidity
– excessive dust
– direct sunlight
• Place the unused paper on a flat surface so that it will 
not warp or bend.
Setting for the Media 
Type in the Printing 
Preferences dialog
Sony High 
Quality Paper
Plain Paper
Number of sheets 
which can be loaded in 
the auto sheet feeder 
tray
Up to 60 sheets Up to 100 
sheets
Number of printed 
pages which can be 
ejected on the tray
Up to 30 
printed pages
Up to 30 
printed pages
Size
A4
A4
Paper loading method
Place papers in 
the auto sheet 
feeder tray, 
facing the more 
whitish side 
down.
Place papers in 
the auto sheet 
feeder tray, 
facing the 
printing side 
down.
Sheet feeding method
Automatic 
paper feeding
Automatic 
paper feeding
Product name
EPP-300A4MD 
Sony High 
Quality Paper 
(300 sheets)
Plain paper
Plain recycled 
paper