Sony LPR-1000MD Manuel D’Utilisation

P

re

parat

io

n

Turning the Printer On/Off

9

Turn the printer power on after you connect the AC 
power cord.
For detailed information on how to connect the AC 
power cord, refer to “Turning the Printer On” described 
in the printed Setup Manual supplied with the printer.

Be sure to remove the sponge stopper attached inside the 
printer at the factory before connecting the AC power 
cord.
For detailed information on how to remove the sponge 
stopper, refer to “Sponge stopper” described in the 
printer Setup Manual supplied with the printer.

To turn the printer on
Set the main power switch to the ON (=) side.

The ON/STANDBY indicator lights up in orange and 
the printer starts.

When both the ON/STANDBY and READY indicators 
light in green after a while and “READY” appears on the 
printer window display, the printer is ready to print.

In standby mode, the printer cannot print. However, the 
power can be saved when the printer is not being used.

To set the printer to standby mode
Push the ON/STANDBY button.
The ON/STANDBY and READY indicators light in 
orange and the printer enters the standby mode.

To restore the printer from standby mode
Push the ON/STANDBY button again.
The ON/STANDBY and READY indicators light in 
green and the message “READY” appears on the printer 
window display.

Use the ON/STANDBY button placed on the front of the 
printer to turn the printer on or off during daily use.
When you do not intend to use the printer for a long 
time, turn the printer off as follows.

Push the ON/STANDBY button.
The printer enters in standby mode.

Main power switch

Lit (green)

READY

Lit (green)

1 ON/STANDBY 
button