Sony rdr-gx700 Manuel D’Utilisation
46
4
Select one of the options, and press
ENTER.
ENTER.
“Modify”: Changes the timer setting. Select
an item using
an item using
</, and adjust using M/m.
Select “OK” and press ENTER.
“Erase”: Erases the timer setting. Select “OK”
and press ENTER.
and press ENTER.
“Check Overlap”: Checks for overlapped
settings.
settings.
Select “Close” to return to the Timer List.
To change or cancel the setting, repeat steps 3
and 4 above.
To change or cancel the setting, repeat steps 3
and 4 above.
When the timer settings overlap
The programme that starts first has priority and the
second programme starts recording only after the
first programme has finished.
second programme starts recording only after the
first programme has finished.
◆When the recordings start at the same time
The programme that is set last has priority. In this
example, timer setting B is set after A, so the first
part of timer setting A will not be recorded.
The programme that is set last has priority. In this
example, timer setting B is set after A, so the first
part of timer setting A will not be recorded.
◆When the end time of one recording and the
start time of another are the same
After finishing the previous recording, the other
recording may be delayed.
start time of another are the same
After finishing the previous recording, the other
recording may be delayed.
To turn off the Timer List
Press O RETURN.
z
Hint
While recording, you cannot modify the timer setting for
the current recording, but you can extend the recording
duration of the recording time (page 44).
the current recording, but you can extend the recording
duration of the recording time (page 44).
Notes
• When “PDC/VPS” is set to “On” for one or more timer
recordings, the start times may change in the event of a
broadcast delay or early start.
broadcast delay or early start.
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has priority.
• Even if the timer is set for the same daily or weekly
programme, the timer recording cannot be made if it
overlaps with a programme that has priority. “
overlaps with a programme that has priority. “
” will
appear next to the overlapped setting in the Timer List.
Check the priority order of the settings.
Check the priority order of the settings.
Modify
Modify the timer setting.
Date
Mon-Sat
22
Start
Prog.
Mode
OK
00
:
22
Stop
15
:
SP
Off
AAB
Cancel
VPS
PDC
Erase
Are you sure you want to erase this timer setting?
Mon-Sat 22:00-22:15 AAB SP
OK
Cancel
Check Overlap
These timer settings overlap.
Close
Fri 29.10 21:00-22:00 AAB
Fri 29.10 21:30-22:30 DEF
SP
LP
PDC/VPS
PDC/VPS
7:00
8:00
9:00
10:00
A
B
will be cut off
7:00
8:00
A
B
9:00
10:00
7:00
8:00
9:00
10:00
A
B