Sony STR-DA9000ES Manuel D’Utilisation

masterpage:Right

filename[\\Nas-data-server\SONY Current jobs\SONY STR-
DA9000ES\DTP\4249349131\424934913STR-DA9000ESUC2\GB070TH_STR-DA9000ES-
U.fm]

 model name1[STR-DA9000ES]

 [4-249-349-13(1)]

* When the IMPEDANCE SELECTOR is set to 

“8

Ω

”, connect speakers with a nominal impedance 

of 16 ohm or higher. When the IMPEDANCE 
SELECTOR is set to “4

Ω

”, connect the speakers 

with a nominal impedance of 8 ohms or higher.

** When you want to turn off the sound output from 

SPEAKERS jacks while turning on the sound 
output from PREOUT jacks, set the SPEAKERS 
FRONT switch to “A”, “B” or “A+B”, then set 
“OUTPUT” in the SPEAKER SET UP menu to 
“PREOUT ONLY” (page 44).

Set the SPEAKERS SURROUND switch 
according to the surround speakers you want to 
drive.

* When the IMPEDANCE SELECTOR is set to “8

Ω

”, 

connect speakers with a nominal impedance of 16 
ohm or higher. When the IMPEDANCE 
SELECTOR is set to “4

Ω

”, connect the speakers with 

a nominal impedance of 8 ohms or higher.

• The settings for surround speakers (page 22) can be 

set separately for the surround speakers connected to 
SPEAKERS SURROUND A and SPEAKERS 
SURROUND B terminals.

• Before setting the surround speakers, select the 

surround speaker system you use.

OFF**

No speaker output.
 (All the sound output from SPEAKERS 
and PREOUT jacks are turned off.)

A

The speakers connected to the 
SPEAKERS SURROUND A terminals 
(7.1 channel).

B

The speakers connected to the 
SPEAKERS SURROUND B terminals 
(5.1 channel).

No sound is output from the surround 
back speakers.

A+B*

The speakers connected to both the 
SPEAKERS SURROUND A and 
SPEAKERS SURROUND B terminals 
(9.1 channel).

When this setting is selected, the 
parameters set for surround speaker-A in 
SPEAKER SET UP are also set for 
surround speaker-B.