Elite Screens TE84VG2 Manuel D’Utilisation
If the electric screen does not move, please check the following:
1.
Check the power supply first. The screen will understandably not move without power.
2. Make sure the power cord is firmly plugged to the power outlet.
3.
Make sure that all cable connections are secure.
4. If the screen works well with the line switch but not with the remote control, please make sure the remote
controls have fresh batteries or replace them with new ones. Change the battery every 6 months to ensure
proper operation of the remotes.
controls have fresh batteries or replace them with new ones. Change the battery every 6 months to ensure
proper operation of the remotes.
5. For
all
other
problems, please contact Elite Screens at Techsupport@elitescreens.com
1. Q: Why does my screen no longer function?
A: There are a few possible things you could check:
2. Q: How is the screen material cleaned?
A: The screen material can be cleaned with mild soap and water.
A.) Make sure your wall plug has power and that the screen is properly plugged in.
B.) Please check the fuse to your screen. (Call Tech support for location of fuse)
C.) If screen works well with the line switch but not with the remote control, make sure the remote control
has good batteries in it.
C.) If screen works well with the line switch but not with the remote control, make sure the remote control
has good batteries in it.
D.) Our electric screens with a tubular motor installed are equipped with a Thermal relay. This would
include all Home 2, CineTension 2 series, and VMAX screens with a diagonal size above 180". This
feature will automatically shut off screen in the event the motor becomes too hot, preventing overheating
of the motor. To correct this, let screen alone for 10-15 minutes and try again.
include all Home 2, CineTension 2 series, and VMAX screens with a diagonal size above 180". This
feature will automatically shut off screen in the event the motor becomes too hot, preventing overheating
of the motor. To correct this, let screen alone for 10-15 minutes and try again.
3. Q: What type of batteries do the remote controls require?
A: The IR and RF remote controls use AAA alkaline batteries
A: The IR and RF remote controls use AAA alkaline batteries
4. Q: Can you manually pull down the screen?
A: No, manually pulling down the screen will damage the electronic motor rolling system.
A: No, manually pulling down the screen will damage the electronic motor rolling system.
5. Q: How could I setup my Screens IR receiver to work with my learning remote control system? Do you have any IR
codes I can use to achieve this?
A: Our IR remote controls have been evaluated and entered in to the databases of some Universal remote control
manufacturers. Please contact the manufacturer of your remote to inquire about your remotes ability to function with
ours. If they have not evaluated our remote control then the following list of Binary codes will be used for most remote
setups.
ours. If they have not evaluated our remote control then the following list of Binary codes will be used for most remote
setups.
For Spectrum, VMAX2 (Plus), Home2 and CineTension 2 Series
Up: 1111 0000 0001
Stop: 1111 0000 0010
Down: 1111 0000 0100
Up: 1111 0000 0001
Stop: 1111 0000 0010
Down: 1111 0000 0100
6. Q: What is the gain on the matte white screen material?
A: The matte white material has a gain of 1.1. For detailed specs, info please check our web-site for more details
A: The matte white material has a gain of 1.1. For detailed specs, info please check our web-site for more details