Panasonic cf-vdrrt3w Manuel D’Utilisation

Is the drive still operating?

While data is being written on the CD-R or CD-RW disc,
the disc cover will not open even when the open button
is pressed.  Wait until the data writing is completed.
When [B’s CLiP] is used, move the cursor to  the 

 icon

displayed on the taskbar and right-click to select [Eject].
If the disc cover fails to open even when [Eject] has been
selected, operate the emergency open lever  (

 page 6

(E)

).

Disc cannot be removed.
(Disc cover will not
open.)

Is the media format or writing system of the DVD disc used
the correct one?

The DVD-R discs that can be used with this drive must
support 4.7 GB (For General/Authoring) and 3.95 GB
version 1.1; similarly, the DVD-RW discs that can be
used must support 4.7 GB version 1.1/1.2.
Furthermore, only discs with data recorded using the Disc-
at-Once system as the writing system can be read.  Check
the media format and writing system of the discs used.

DVD-R or DVD-RW
discs cannot be read.

Uninstall Adaptec CD-Burning Plug-in (

 page 15).

If Windows Media Player 7 has been installed, update it
to Windows Media Player 9 by installing PowerDVD and
uninstall the CD Burning Plug-in.

B’s Recorder and B’s
CLiP does not operate
properly (When installing
Media Player 7 or Media
Player 9 under Windows
2000)

Use the same drive and same writing software to write data.
Otherwise, it may not be possible to either read the data
before it is added or read or write the data correcting using
the drive or another drive.

How to add data using
multiple CD-R/CD-RW
drives or multiple kinds of
writing software?

If data is written with B's
Recorder using USB1.1
port, the "XX transmis-
sion speed error, but were
circumvented" message
appears.

This means that transmission failed but that the error was
circumvented so no problems are posed.

It is not possible to use writing software that does not sup-
port the drive.

The drive is not recognized
by writing software other
than the one provided.