Panasonic dvd-s32 Manuel D’Utilisation

RQT8

68

5

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart do not solve the problem, consult 
your dealer for instructions. (Reference pages are shown in parentheses.)

≥ Insert the AC mains lead securely into the household mains 

socket. (6)

≥ When “AUTO POWER OFF” is set to “ON”, the unit 

automatically switches to standby after approximately 30 
minutes in the stop mode. (15)

≥ This unit cannot play discs other than the ones listed in 

these operating instructions. (4)

≥ The unit may not be operating properly due to lightning, 

static electricity or some other external factor. Turn the unit 
off and then back to ON. Alternatively, turn the unit off, 
disconnect the AC mains lead, and then reconnect it.

≥ Condensation has formed: Wait 1 to 2 hours for it to 

evaporate.

≥ Check that the batteries are installed correctly. (6)

≥ The batteries are depleted: Replace them with new ones. (6)

≥ Point the remote control at the remote control sensor and 

operate. (8)

≥ When operating the On-Screen Menus, even if the items are 

lined up vertically, select the item with [

2 1] and then set 

the item using [

3 4].

≥ Check the video or audio connection. (5, 6)

≥ Check the power or input setting of the connected equipment.

≥ Check that the disc has something recorded on it.

You have forgotten 
your ratings 
password.
Reset all the settings 
to Factory Preset.

≥ While stopped, remove the disc, and then press and hold 

[

1] (PLAY) and [<OPEN/CLOSE] on the unit and then also 

press and hold [

Í/I] on the unit until “INITIALIZED” 

disappears from the television. Turn the unit off and on 
again. All settings will return to the default values.

≥ Play may take time to begin when an MP3 track has still 

picture data. Even after the track starts, the correct play time 
will not be displayed, however this is normal.

≥ These functions do not work with some DVD-Videos.

[VCD] with 

playback control

≥ Press [∫] twice and then press [1] (PLAY).

Play doesn’t start. 

≥ If a disc contains CD-DA and other formats, proper playback 

may not be possible. 

≥ Display the subtitles. (12)

§1

≥ Clear the subtitles. (12)

≥ The end of an item becomes point B when it is reached.

≥ A-B Repeat is canceled when you press [QUICK REPLAY].

≥ Repeat play may be canceled when you press [M.SKIP] or 

[CM SKIP].

≥ Ensure that the unit is not connected through a video 

cassette recorder. (5)

≥ Make sure that progressive output has not been selected 

when the connected television is not progressive compatible. 
Press and hold [RETURN] until the picture displays correctly. 
The settings will return to “INTERLACE”.

≥ Change “TV ASPECT” in “VIDEO” tab. (14)
≥ Use the television to change the aspect. If your television 

does not have that function, change “TV ASPECT”. (14)

≥ Change the Zoom setting. (10)

≥ Set “Transfer Mode” to “AUTO”. (13)

[Unit\with\PX\printed\on\the\outer\packaging]
≥ PAL discs cannot be played.
[The\United\Kingdom,\Asia,\Australia\and]N.Z.]
≥ The unit and television are using different video systems.

[Asia] Use a multi-system or NTSC television.
[The\United\Kingdom,\\Australia\and]N.Z.] 
Use a multi-system or PAL television.

[The\United\Kingdom,\Asia,\Australia\and]N.Z.]

≥ The system used on the disc doesn’t match your television.

–PAL discs cannot be correctly viewed on an NTSC 

television.

–This unit can convert NTSC signals to PAL60 for viewing on 

a PAL television (“NTSC DISC OUT” in “VIDEO” tab). (14)

≥ Restore the zoom ratio to “NORMAL”. (10)
≥ Change “TV ASPECT” in “VIDEO” tab. (14)

RQT8685-2B.fm  Page 16  Tuesday, April 25, 2006  9:05 AM