Panasonic gp8du panel replacement Instruction De Maintenance
Transferring the SU-Board
1. Remove the 2 screws of the SU
board as indicated in figure 14.
2. Disconnect the bridge connector
(SU45 or SC45) and slide the SU-
board to the left to disconnect the
coupler (SC41 -SU41) from the SC
board.
board to the left to disconnect the
coupler (SC41 -SU41) from the SC
board.
3. Remove the flexible cables (SU1,
SU2, SU3, SU4) and place the SU
board aside. Installation is
performed after the removal of the
SC board.
board aside. Installation is
performed after the removal of the
SC board.
Transferring the SD-Board
1. Remove the two screws of the SD
board as indicated in figure 14.
2. Disconnect the bridge connector
(SD46 or SC46) and slide the SD
board to the left to disconnect from
the coupler (SC42 -SD42) on the
SC board.
board to the left to disconnect from
the coupler (SC42 -SD42) on the
SC board.
3. Remove the flexible cables (SD1,
SD2, SD3, SD4) connected to the
SD-Board, and place the SD board
aside. Installation is performed after the removal of the SC board.
SD-Board, and place the SD board
aside. Installation is performed after the removal of the SC board.
Figure 14. SU and SD boards
8