Panasonic gp8du panel replacement Instruction De Maintenance
Transferring the SC-Board (37, 42inch)
1. Disconnect from adjoining boards
any cable that originates from the
SC board.
SC board.
2. Remove the six screws that attach
the SC board to the panel. Place
the SC board aside.
the SC board aside.
3. Remove the rubber insulator
located underneath the SC board
and transfer it to the new panel.
(See figure 16.)
and transfer it to the new panel.
(See figure 16.)
4. Transfer the SC-Board to the new
panel.
5. Connect the flexible cables (SU1,
SU2, SU3, SU4) to the SU board
and slide the SU board to the right
into the coupler (SC41) of the SC-
Board.
and slide the SU board to the right
into the coupler (SC41) of the SC-
Board.
Figure 15. SC Board
6. Connect the flexible cables
(SD1, SD2, SD3, SD4) to the
SD board and slide the SD
board to the right into the
coupler (SC42) of the SC-
Board.
SD board and slide the SD
board to the right into the
coupler (SC42) of the SC-
Board.
Figure 16. Rubber Insulator
7. Install the screws that secure
the SD and SU boards to the
new panel.
new panel.
9