Panasonic KX-TG8070E Manuel D’Utilisation
Preparation
10
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Battery installation and
replacement
replacement
Important:
L
L
L
USE ONLY rechargeable Ni-MH batteries AAA
(R03) size.
(R03) size.
L
Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
batteries.
L
Ensure correct polarities (S, T) when installing
the batteries.
the batteries.
L
Wipe the battery ends (S, T) with a dry cloth.
L
When installing the batteries, avoid touching the
battery ends (S, T) or the unit contacts.
battery ends (S, T) or the unit contacts.
L
When replacing batteries, we recommend using
the Panasonic rechargeable batteries noted on
page 4, 5.
the Panasonic rechargeable batteries noted on
page 4, 5.
1
Press the notch on the handset cover firmly
and slide it in the direction of the arrow.
and slide it in the direction of the arrow.
2
Insert the batteries negative (T) end first.
Close the handset cover.
Close the handset cover.
Battery charge
Place the handset on the base unit or charger
for about 8 hours before initial use.
When charging, the battery icon is shown as
follows.
for about 8 hours before initial use.
When charging, the battery icon is shown as
follows.
When the batteries are fully charged, @ remains
on the display.
on the display.
*1 The pictured model is KX-TG8070.
*2 KX-TG8092/KX-TG8093
Note:
L
*2 KX-TG8092/KX-TG8093
Note:
L
It is normal for the handset to feel warm during
charging.
charging.
L
If you want to use the unit immediately, charge
the batteries for at least 15 minutes.
the batteries for at least 15 minutes.
L
Clean the charge contacts of the handset, base
unit, and charger with a soft, dry cloth once a
month. Clean more often if the unit is subject to
the exposed of grease, dust, or high humidity.
unit, and charger with a soft, dry cloth once a
month. Clean more often if the unit is subject to
the exposed of grease, dust, or high humidity.
Rechargeable
Ni-MH ONLY
Ni-MH ONLY
Base unit
Charger
@
?
/
TG8070-8090E(e).book Page 10 Monday, June 11, 2007 8:12 PM